Transmission Mount: Service and Repair

1 Nut M12 x 1.5
2 Spring washer B 12
3 Transmission flange
4 Engine mount 123 240 04 13
5 Threaded plate
6 Bracket
7 washer 8.4
8 Spring washer A 8
9 Adjusting screw M8 x 75
10 Spacer
11 Closing plate
12 Washer
13 Spring washer A8
14 Screw M8 x 32
15 washer
16 Screw M8 x 20


CAUTION:
Do not unscrew closing plate (11) when removing engine mount (4).

Attach engine mount to closing plate without tension.

Upon installation of engine mount, run engine for a short period at Idle speed with adjusting screw loose. Tighten adjusting screw (9) to 30 Nm with engine stopped.

CAUTION: Check regulating linkage for proper function.