AR00.19-P-0120-29A Remove Female Contact From Miniature Double Flat Spring Contact Coupling

AR00.19-P-0120-29A Remove Female Contact From Miniature Double Flat Spring Contact Coupling


220 589 04 99 00, New passenger vehicle wiring harness repair kit







000 589 13 99 00, Wiring harness repair kit, basic







220 589 01 99 50, Blade holder with clamping pliers







220 589 01 99 56, LSK 8 blade







Secondary release on version with locking grille (1)

1 Insert a suitable tool on side between locking grille (1) and housing.
2 Slide locking grille (1) in direction of arrow .

Shown on a 9-pin MDK, DFK coupling







Secondary unlocking for version with slide (1)

1 Insert a suitable tool on side between slide (1) and housing.
2 Move slide (1) in direction of arrow .

Shown on a 5-pin MDK, DFK coupling







Unpin female contacts from coupling (MDK)

1 Insert blade holder with clamping pliers and LSK 8 blade from front end through the openings in coupling contact cavity.

This pushes together the springs at the female contact (1).

2 A slight tug on the corresponding cable will remove the female contact (1) from the coupling.

Shown on a 9-pin MDK, DFK coupling