Compressor Clutch Coil: Service and Repair

Removal

1 Remove spring plate and pulley. Service and Repair

2 Mark position of electric connections on coupler housing on front head member of refrigerant compressor.





3 Remove locking ring (3).

4 Lift clutch coupler (2) from refrigerant compressor (1).

1 Refrigerant compressor
2 Clutch coupler
3 Locking ring

Installation

5 Insert clutch coupler (2) on front head member of refrigerant compressor in such a manner that the electrical connections are in alignment with the markings previously made on refrigerant compressor.

6 Align guide pins at bottom on coupler housing with holes in front head member of refrigerant compressor.

7 Install locking ring (3) with flat side of ring in direction of coupler.

8 Install pulley and spring plate. Service and Repair